Gem Drytech supplied and commissioned a Cocopro 12 Module Combination Dryer for Oriental Golden Coco Inc., Philippines, delivering continuous coconut drying with final moisture of 3%–4.5% and product recovery of 1000–1300 kg/hr under actual production conditions.
Read More
Gem Drytech supplied and commissioned a complete rotary dryer system for a biomass and renewable energy company in Kolkata, designed to process 3000 kg/hr of saw dust and reduce moisture from approximately 50% to around 12% for fuel processing applications.
Read More
Gem Drytech supplied a complete high-capacity coconut processing line for BETRIMEX, Vietnam, including a multi-stage combination fluid bed dryer system for desiccated coconut production. The integrated solution was designed to process about 2267 kg/hr feed at 57% moisture and deliver approximately 1000 kg/hr dried product at around 2.5% final moisture with reliable, continuous industrial performance.
Read More
A customised BELTOTHERM belt dryer used the plant’s existing flue gas to process more than 650 kg/hour of gelatin filter-press sludge, reducing moisture from approximately 70% to around 10% in this installation.
This project result is specific to the supplied sludge and heat source. A new project requires the gas temperature, flow, composition, dust and operating availability, together with sludge variability, handling behaviour, target moisture and exhaust requirements.
See the waste-heat assessment guide and sludge and biosolids belt-drying guide. Send the material and heat-source data for an application-specific assessment.
Read More
A customized BELTOTHERM belt dryer solved abrasion, transfer, and sticking issues that had caused paddle dryer and conventional system failures, achieving stable continuous drying at 70 kg/hr.
Read More
A BELTOTHERM sludge drying system converted highly sticky paper-mill bio-sludge into usable boiler fuel, enabling zero-waste handling and reducing both disposal and external fuel costs.
Read More
A continuous mesh belt dryer processed 8000 kg/hr of coal tar pitch, reducing moisture from 3% to 0.3% with controlled drying and dependable high-volume operation.
Read More
A compact single drum dryer converted liquid salt slurry into dry salt flakes, simplifying handling, storage, and downstream processing with stable continuous operation.
Read More
An SS 316 paddle dryer with a gas-fired thermic fluid system transformed sticky ETP sludge into a dry, manageable solid, reducing disposal cost and improving environmental compliance.
Read More
A high-capacity continuous band dryer replaced three legacy dryers, lifted throughput to 1,600–1,800 lb/hour, and delivered final moisture below 8% for downstream milling into powder and fibre ingredients.
This project concerned cranberry pomace with feed moisture around 70%. Its published throughput and final-moisture result reflect this installation and should not be treated as a general rating for other fruit residues.
For a new project, provide material source, particle or fibre form, wet feed rate, inlet and target moisture, temperature limit, available heat and downstream milling specification. Review the belt dryer RFQ checklist and discuss representative trials.
Read More
